Remove/install rear seat backrest - AR91.12-P-1620LW

MODEL 205.0/1 without CODE 287 (Folding rear seat backrests) 

Fig 1: Identifying Rear Seat Backrest Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Move head restraint all way down
2	Remove seat cushion in the rear	MODEL 205.0/1 with CODE 248 (Rear seat with integrated child seat) without CODE 287 (Folding rear seat backrests) MODEL 205.0 with CODE P10 (Taxi package Germany) without CODE 287 (Folding rear seat backrests)	AR91.12-P-1020LWA
		MODEL 205.0/1 without CODE 248 (Rear seat with integrated child seat) without CODE 287 (Folding rear seat backrests) without CODE P10 (Taxi package Germany)	AR91.12-P-1020LW
3	Remove screws/bolts (4)
4	Unscrew nuts (3)	Nut/bolt, bottom of backrest to body	*BA91.12-P-1001-03M
5	Press backrest bolsters (2) toward rear and unhook toward inside
6	Remove backrest (1) upwards from hooks (5)	Ensure that backrest (1) is seated correctly in hooks (5).
7	Guide right and left seat belt behind backrest (1)
8	Pull out center seat belt and remove backrest (1)	Carefully remove backrest (1) from vehicle. Otherwise components of the vehicle may be damaged. Helper required.
9	Install in the reverse order