Remove/install door frame seal - AR72.10-P-2120LW

Model 205.0/1/2 

Model 253 

Fig 1: Identifying Door Frame Seal Remove/Install Components - Shown On Model 205.0

Courtesy of MERCEDES-BENZ USA

Shown on MODEL 205.0 without CODE 810 (Sound system) 

	Risk of injury  caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	No parts of the body or limbs should be within the operating area when the components are moving.	AS00.00-Z-0011-01A
	Remove
1	Remove door lining (1) from front door (2)		AR72.10-P-1000LW
2	Remove mirror triangle paneling (3)	Model 205.0/1/2 with code 810 (Sound system) Model 253 with code 810 (Sound system) Allow mirror triangle paneling (3) to hang down with electrical line connected.
3	Remove window frame paneling (4)	The window frame paneling (4) is fastened positively to the window frame and additionally clipped into the window frame with a retaining clip (4.1) in the area of the mirror triangle.
4	Detach left front door control unit (N69/1) or right front door control unit (N69/2) from front door	Model 205.0 except code 700 (Technology Local Content China) Model 205.2
5	Remove sealing frame (5) from front door (2)
6	Remove adhesive residues from front door (2) and clean gluing surface with adhesive removal disc
	Notes on removing adhesive residues and foils on paint and metal surfaces with surface conditioning disks		AH00.00-P-0013-01AK
		Bonding surface must be free of grease and dust. Use commercially available ø 100 mm adhesive removal disc.
		Cleaner	*BR00.45-Z-1025-04A
	Install
7	Glue sealing frame (5) to front door (2)	Model 205.0 except code 700 (Technology Local Content China) Model 205.2	AR72.10-P-2120-05LW
		Model 205.0 with code 700 (Technology Local Content China) Model 205.1 Model 253	AR72.10-P-2120-05LWA
		Roller	Fig 2
		Model 205.0 except code 700 (Technology Local Content China) Model 205.2 Template	Fig 3
8	Fasten left front door control unit (N69/1) or right front door control unit (N69/2) on front door (2)	Model 205.0 except code 700 (Technology Local Content China) Model 205.2
9	Install window frame paneling (4) on window frame
10	Install mirror triangle paneling (3)
11	Install door lining (1) on front door (2)		AR72.10-P-1000LW

Fig 2: Identifying Roller (168 589 05 63 00)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Template (205 589 01 23 00)

Courtesy of MERCEDES-BENZ USA