Remove, replace and install rear center seat belt - AR91.40-P-0683LWA

Model 205.0/1 with code 287 (Folding rear seat backrests)

Model 205.2

Model 253

Shown on removed padding

Fig 1: Installing Rear Center Seat Belt - Shown On Removed Padding

Courtesy of MERCEDES-BENZ USA

	Risk of injury. Injury may result when the tension in the spring in the automatic belt retractor is released.	Never disassemble automatic belt retractors.	AS91.00-Z-0002-01A
	Remove/install
1	Loosen cover of left backrest in rear until belt retractor (4) is accessible		AR91.18-P-1874LW
2	Lift lining at rear backrest and remove screw/bolt (1) of belt retractor (4)	Do not kink the lining.
2		Bolt, center seat belt retractor to rear seat backrest	*BA91.40-P-1007-01U
3	Lift cover with padding, remove belt retractor (4) and guide seat belt (2) through seat belt channel (3)
4	Install in the reverse order

SEAT BELTS/EMERGENCY TENSIONING RETRACTORS

Number	Designation		Model 205.0	Model 205.1
BA91.40-P-1007-01U	Bolt, center seat belt retractor to rear seat backrest	Nm	35	35

SEAT BELTS/EMERGENCY TENSIONING RETRACTORS

Number	Designation		Model 205.2	Model 253
BA91.40-P-1007-01U	Bolt, center seat belt retractor to rear seat backrest	Nm	35	35