Remove/install steering wheel - AR46.10-P-0100CW
MODEL 204, 207
Shown on model 204.0 up to model year 2012/AEJ 11
Shown on model 204.9 as of model year 2013/AEJ 12
| Remove/install | |||
| 1 | Turn steering wheel (1) into the center position (front wheels in straight-ahead position) | ||
| Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. | Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply. | AS91.00-Z-0001-01A | |
| 2 | Remove airbag unit from steering wheel (1) | MODEL 204.9 up to model year 2013 /AEJ12MODEL 204.0/2 up to model year 2012/AEJ11 |
AR91.60-P-0660CW |
| MODEL 204.0/2, 207 as of model year 2012 /AEJ11MODEL 204.9 as of model year 2013/AEJ12 |
AR91.60-P-0660EL | ||
| MODEL 207 up to model year 2012AEJ 11 |
AR91.60-P-0660EW | ||
| 3 | Remove bolt (1s), in the process counterhold the steering wheel (1) | ||
| *BA46.10-P-1001-02J | |||
| 4 | Take steering wheel (1) out until electrical connection (2) is accessible and disconnect electrical connection (2) | MODEL 204, 207 with CODE 442 (Luxury multifunction steering wheel) |
|
| 5 | Remove steering wheel (1) | ||
| 6 | Install in the reverse order | ||
| 7 | Conduct a road test | Indicator lamp for supplemental restraint system (A1e15): For a full-lock position in either direction, the Supplemental Restraint System (SRS) indicator lamp must not light up. Position of the steering wheel: If the steering wheel (1) is at a slant, adjust it by max. one tooth. |
STEERING WHEEL
| Number | Designation | MODEL 204 | MODEL 207 | |
|---|---|---|---|---|
| BA46.10-P-1001-02J | Screw/bolt, steering wheel to steering shaft | Nm | 80 | 80 |