Legend of electrical function schematic for on board electrical system control - PE54.10-P-2052-60FAA
Model 204 up to Model Year 2008/modification year 2007
| Code | Designation | Coordinates |
|---|---|---|
| A8/1 | Transmitter key | 21C |
| B95 | Battery sensor | 25E 25G |
| F32k2 | Quiescent current cutout relay | 20J |
| G2 | Generator | 2E 2G |
| N3/9 | CDI control unit | 8E |
| N3/10 | ME-SFI [ME] control unit | 8G |
| N10/1 | Front SAM control unit with fuse and relay module | 13F |
| N10/2 | Rear SAM control unit with fuse and relay module | 20F |
| N73 | Electronic ignition switch control unit | 19A |
| U74 | Valid for diesel engines | 6E |
| U75 | Valid for gasoline engines | 6G |
| U739 | Valid for gasoline engine 271 | 1G 24G |
| U740 | Valid for diesel engine 646 | 1E 24E |
| U819 | Valid for gasoline engine 272 | 1G 24G |
| U880 | Valid for diesel engine 642 | 1E 24E |
| CAN B | Interior CAN | 17G 20E |
| CAN E | Chassis CAN | 11G |
| LIN B7 | On-board electrical system LIN | 22G |
| 1 | Circuit 61, status | 6F 12F 18F |
| 2 | Circuit 15, status | 20F |
| 3 | Battery voltage, signal | 21F |
| 4 | Quiescent current, signal | 22F |
| 5 | Battery, status | 15F |
| 6 | Alternator, request | 4F |
| 7 | Idle speed increase, request | 10F 16F |
| 8 | On-board electrical system limp-home mode, signal | 10F 16F |
| 9 | Consumer shutoff, request | 16F |
| 10 | Quiescent current cutout relay, actuation | 20J |