Remove/install front panoramic glass roof - AR77.21-P-0500NKB
MODEL 242 with CODE 413 (Panoramic glass roof with top sliding roof)
MODEL 246 with CODE 413 (Panoramic glass roof with top sliding roof)
Shown on the right-hand side
| Remove | |||
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Notes on self-locking nuts and bolts | AH00.00-N-0001-01A | ||
| 1 | Move front glass roof (1) to tilt position | ||
| 2 | Remove left and right rubber bellows | AR77.21-P-0530NKB | |
| 3 | Loosen bolts (2) in area of screws (3) on left and right side of front glass roof (1) | ||
| 4 | Remove screws/bolts (3) | ||
| 5 | Remove front glass roof (1) | ||
| Install | |||
| 6 | Insert front glass roof (1) and screw in bolts (3) up to stop | ||
| 7 | Adjust front glass roof (1) and complete vehicle | AR77.21-P-0501CW |