LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2014 >> S63 AMG >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Air Intake, Turbocharging - 222 Chassis >> Testing & Repair >> Drain/fill low-temperature circuit coolant >> Drain/fill low-temperature circuit coolant - AR09.41-P-6834LFB

Drain/fill low-temperature circuit coolant - AR09.41-P-6834LFB

ENGINE 157, 278 in MODEL 217, 222 

ENGINE 276 in MODEL 217, 222 

MODIFICATION NOTES

13.08.2015 Equipment, refrigeration Engine 157 in Model 217 BF20.00-P-1001-02FA
13.08.2015 Equipment, refrigeration Engine 157 in Model 222 BF20.00-P-1001-02FA
13.08.2015 Equipment, refrigeration Engine 157 in Model 217 BF20.00-P-1001-02FA
13.08.2015 Equipment, refrigeration Engine 157 in Model 222 BF20.00-P-1001-02FA

Shown on engine 278 

Fig 1: Low-Temperature Coolant Circuit Drain/Fill Components - Shown On Engine 278
G11132038Courtesy of MERCEDES-BENZ USA
DANGER Risk of injury  to skin and eyes suffering scalding from contact with hot coolant spray. Risk of poisoning  from swallowing coolant. Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.
AS20.00-Z-0001-01A
NOTES Notes on coolant   AH20.00-N-2080-01A
  Remove     
1 Remove upper center engine cover    
2 Unscrew cap (1) on low-temperature circuit coolant expansion reservoir (2)    
3 Remove front and center lower engine compartment paneling   AR61.20-P-1105LF
  Drain off     
4 Remove drain stop plug (4) from drain fitting (3) and drain off coolant IMPORTANT Collect coolant in a suitable container.  
  Pour in     
5 Close off drain stop plug (4)    
6 Pour in coolant and bleed cooling system IMPORTANT Use clean coolant. AR20.00-P-1142-04A
    FLUID Engine 276 in model 217
Engine 276 in model 222 cooling system
*BF20.00-P-1001-02BA 
    FLUID Engine 278 in model 217
Engine 278 in model 222 cooling system
*BF20.00-P-1001-02EA 
    FLUID Engine 157 in model 217
Engine 157 in model 222 cooling system
*BF20.00-P-1001-02FA 
    SPECIAL TOOL Cooler vacuum filling device Fig 4
    SPECIAL TOOL NTKL Adaption Fig 3
    SPECIAL TOOL Electric vacuum pump Fig 2
    SPECIAL TOOL Test cap Figure
INSPECT Check     
7 Check low-temperature circuit for leaktightness    
DANGER Risk of accident  from vehicle starting off by itself when engine running. Risk of injury  (bruises and burns) resulting from working on the engine while it is being started or when it is running. Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. AS00.00-Z-0005-01A
6 Screw cap (1) onto low-temperature circuit coolant expansion reservoir (2)    
INSTALLING Install     
9 Install front and center engine compartment paneling   AR61.20-P-1105LF
10 Install upper engine cover    
COOLING SYSTEM

Number Designation Engine 276 in model 217 Engine 276 in model 222 (except 222.163)
BF20.00-P-1001-02BA Cooling system Workshop replacement amount Main circuit | ≈12, 3 ≈12, 3
Low-temperature circuit | ≈3, 2 ≈3, 2
Antifreeze/water Down to -37°C % 50/50 50/50
-38°C and below % 55/45 55/45
Specifications for Operating Fluids, sheet   Coolant (Specification 310.1). See https://bevo.mercedes-benz.com/index.php?language_id=1 Coolant (Specification 310.1). See https://bevo.mercedes-benz.com/index.php?language_id=1
Specifications for Operating Fluids, sheet   Anticorrosion agent/antifreeze (Specification 325.6). See https://bevo.mercedes-benz.com/index.php?language_id=1 Anticorrosion/antifreeze agents (Specification 325.0). See https://bevo.mercedes-benz.com/index.php?language_id=1
Specifications for Operating Fluids, sheet   Premixed coolant (Specification 326.6). See https://bevo.mercedes-benz.com/index.php?language_id=1 Premixed coolant (Specification 326.0). See https://bevo.mercedes-benz.com/index.php?language_id=1
COOLING SYSTEM

Number Designation Engine 276 in model 222.163
BF20.00-P-1001-02BA Cooling system Workshop replacement amount Main circuit | ≈12, 6
Low-temperature circuit | ≈11
Antifreeze/water Down to -37°C % 50/50
-38°C and below % 55/45
Specifications for Operating Fluids, sheet   Coolant (Specification 310.1). See https://bevo.mercedes-benz.com/index.php?language_id=1
Specifications for Operating Fluids, sheet   Anticorrosion/antifreeze agents (Specification 325.0). See https://bevo.mercedes-benz.com/index.php?language_id=1
Specifications for Operating Fluids, sheet   Premixed coolant (Specification 326.0). See https://bevo.mercedes-benz.com/index.php?language_id=1
COOLING SYSTEM

Number Designation Engine 278 in model 217 Engine 278 in model 222
BF20.00-P-1001-02EA Cooling system Workshop replacement quantity Main circuit Liter ≈12, 1 ≈12, 1
Low temperature circuit Liter ≈3, 6 ≈3, 6
Antifreeze/water Up to -37°C % 50/50 50/50
As of -38 °C % 55/45 55/45
Specification   Coolant (Specification 310.1). See https://bevo.mercedes-benz.com/index.php?language_id=1 Coolant (Specification 310.1). See https://bevo.mercedes-benz.com/index.php?language_id=1
Specification   Anticorrosion/antifreeze agents (Specification 325.0). See https://bevo.mercedes-benz.com/index.php?language_id=1 Anticorrosion/antifreeze agents (Specification 325.0). See https://bevo.mercedes-benz.com/index.php?language_id=1
Specification   Premixed coolant (Specification 326.0). See https://bevo.mercedes-benz.com/index.php?language_id=1 Premixed coolant (Specification 326.0). See https://bevo.mercedes-benz.com/index.php?language_id=1
COOLING SYSTEM

Number Designation Engine 157 in model 217 Engine 157 in model 222
BF20.00-P-1001-02FA Cooling system Workshop change quantity Main circuit Liter ≈9 ≈9
Low-temperature circuit Liter ≈2, 5 ≈2, 5
Antifreeze/water Up to -37 °C % 50/50 50/50
As of -38 °C % 55/45 55/45
Specification   Coolant (Specification 310.1). See https://bevo.mercedes-benz.com/index.php?language_id=1 Coolant (Specification 310.1). See https://bevo.mercedes-benz.com/index.php?language_id=1
Specification   Anticorrosion/antifreeze agents (Specification 325.0). See https://bevo.mercedes-benz.com/index.php?language_id=1 Anticorrosion/antifreeze agents (Specification 325.0). See https://bevo.mercedes-benz.com/index.php?language_id=1
Specification   Premixed coolant (Specification 326.0). See https://bevo.mercedes-benz.com/index.php?language_id=1 Premixed coolant (Specification 326.0). See https://bevo.mercedes-benz.com/index.php?language_id=1
Fig 2: Identifying Electric Vacuum Pump (285 589 02 21 00)
G10126591Courtesy of MERCEDES-BENZ USA
Fig 3: Identifying NTKL Adaption (285 589 01 21 00)
G10126592Courtesy of MERCEDES-BENZ USA
Fig 4: Identifying Cooler Vacuum Filling Device (285 589 00 21 00)
G09981978Courtesy of MERCEDES-BENZ USA
Fig 5: Identifying Test Cap (210 589 00 91 00)
G09981975Courtesy of MERCEDES-BENZ USA