Remove/install Parktronic system (PTS) sensors in rear bumper - AR54.65-P-0002LF
MODEL 217
MODEL 222
with CODE 235 (Active Parking Assist with PARKTRONIC)
Shown on MODEL 222
Fig 1: Parktronic System (PTS) Sensors In Rear Bumper Remove/Install Components - Shown On Model 222
| Remove/install | |||
| 1 | Remove rear bumper | MODEL 217 | AR88.20-P-2200LC |
| MODEL 222 | AR88.20-P-2200LF | ||
| 2 | Disconnect electrical connectors (1) from rear parking system distance sensors (B8/7-12) | ||
| 3 | Release retaining lugs (arrows) and remove rear parking system distance sensors (B8/7-12) from corresponding brackets (2) | ||
| 4 | Install in the reverse order | ||
| Check | |||
| 5 | Perform function test |