Checking rear axle camber - AR40.20-P-0331LF

MODEL 217

MODEL 222

	Check
1	Checking rear axle camber	The camber on the rear axle is not adjustable. If substantial deviations in the rear axle camber are found, the cause may be one of the following: Excessive difference in vehicle level between left and right side of vehicle. Deformation of camber strut. Deformation of rear axle carrier, e.g. as a result of accident damage. Deformation of body, e.g. as a result of accident damage
		MODEL 222 Camber at vehicle level	*BE40.20-P-1001-09Q
		MODEL 222 Permissible difference in rear axle camber between right and left side of vehicle	*BE40.20-P-1002-09Q
		MODEL 217 Camber at vehicle level	*BE40.20-P-1001-09ZA
		MODEL 217 Permissible difference in rear axle camber between right and left sides of vehicle	*BE40.20-P-1002-09ZA
2	Checking accident vehicles and vehicles possibly damaged in an accident	Camber values are not attained despite new camber strut ↓ Check vehicle for accident damage	AR40.30-P-0400CW

CHECK VALUES FOR REAR AXLE CAMBER

Number	Designation			MODEL 222 except 4MATIC, except CODE 487/Z07	MODEL 222 with CODE 487
BE40.20-P-1001-09Q	Camber at vehicle level	-3.17°	∠°	-2° 3' (±30')	-2° 3' (±30')
		-2.42°	∠°	-	-
		-2.40°	∠°	-1° 51' (±30')	-1° 51' (±30')
		-2.03°	∠°	-	-
		-1.76°	∠°	-	-
		-1.64°	∠°	-	-
		-1.63°	∠°	-1° 40' (±30')	-1° 40' (±30')
		-0.98°	∠°	-	-
		-0.19°	∠°	-	-

CHECK VALUES FOR REAR AXLE CAMBER

Number	Designation			MODEL 222 with 4MATIC	MODEL 222 with CODE Z07
BE40.20-P-1001-09Q	Camber at vehicle level	-3.17°	∠°	-2° 3' (±30')	-
		-2.42°	∠°	-	-
		-2.40°	∠°	-1° 51' (±30')	-
		-2.03°	∠°	-	-
		-1.76°	∠°	-	-1° 48' (±30')
		-1.64°	∠°	-	-
		-1.63°	∠°	-1° 40' (±30')	-
		-0.98°	∠°	-	-1° 37' (±30')
		-0.19°	∠°	-	-1° 26' (±30')

CHECK VALUES FOR REAR AXLE CAMBER

Number	Designation			MODEL 222 AMG, except 4MATIC	MODEL 222 AMG, with 4MATIC
BE40.20-P-1001-09Q	Camber at vehicle level	-3.17°	∠°	-2° 3' (±30')	-
		-2.42°	∠°	-	-1° 58' (±30')
		-2.40°	∠°	-1° 51' (±30')	-
		-2.03°	∠°	-	-1° 51' (±30')
		-1.76°	∠°	-	-
		-1.64°	∠°	-	-1° 45' (±30')
		-1.63°	∠°	-1° 40' (±30')	-
		-0.98°	∠°	-	-
		-0.19°	∠°	-	-

TEST AND ADJUSTMENT VALUES FOR REAR AXLE CAMBER

Number	Designation			Model 217.382/482 except code 494/487	Model 217.382/482 with code 494 except code 487
BE40.20-P-1001-09ZA	Camber at vehicle level	-3.84°	∠°	-	-
		-3.36°	∠°	-2° 6' (±30')	-
		-2.88°	∠°	-	-1° 59' (±30')

TEST AND ADJUSTMENT VALUES FOR REAR AXLE CAMBER

Number	Designation			Model 217.382/482 with code 487	Model 217.364/384/385
BE40.20-P-1001-09ZA	Camber at vehicle level	-3.84°	∠°	-	-
		-3.36°	∠°	-	-
		-2.88°	∠°	-1° 59' (±30')	-1° 59' (±30')

TEST AND ADJUSTMENT VALUES FOR REAR AXLE CAMBER

Number	Designation			AMG model 217.377/379/477/479	AMG model 217.378/478 except code 494
BE40.20-P-1001-09ZA	Camber at vehicle level	-3.84°	∠°	-	-2° 16' (±30')
		-3.36°	∠°	-	-
		-2.88°	∠°	-1° 59' (±30')	-

TEST AND ADJUSTMENT VALUES FOR REAR AXLE CAMBER

CHECK VALUES FOR REAR AXLE CAMBER

Number	Designation		MODEL 222 except 4MATIC, except CODE 487/Z07	MODEL 222 with CODE 487
BE40.20-P-1002-09Q	Permissible difference in rear axle camber between right and left side of vehicle	∠°	±30'	±30'

CHECK VALUES FOR REAR AXLE CAMBER

Number	Designation		MODEL 222 with 4MATIC	MODEL 222 with CODE Z07
BE40.20-P-1002-09Q	Permissible difference in rear axle camber between right and left side of vehicle	∠°	±30'	±30'

CHECK VALUES FOR REAR AXLE CAMBER

Number	Designation		MODEL 222 AMG, except 4MATIC	MODEL 222 AMG, with 4MATIC
BE40.20-P-1002-09Q	Permissible difference in rear axle camber between right and left side of vehicle	∠°	±30'	±30

TEST AND ADJUSTMENT VALUES FOR REAR AXLE CAMBER

Number	Designation		Model 217.382/482 except code 494/487	Model 217.382/482 with code 494 except code 487
BE40.20-P-1002-09ZA	Permissible difference in rear axle camber between right and left sides of vehicle	∠°	±30'	±30'

TEST AND ADJUSTMENT VALUES FOR REAR AXLE CAMBER

Number	Designation		Model 217.382/482 with code 487	Model 217.364/384/385
BE40.20-P-1002-09ZA	Permissible difference in rear axle camber between right and left sides of vehicle	∠°	±30'	±30'

TEST AND ADJUSTMENT VALUES FOR REAR AXLE CAMBER

Number	Designation		AMG model 217.377/379/477/479	AMG model 217.378/478 except code 494
BE40.20-P-1002-09ZA	Permissible difference in rear axle camber between right and left sides of vehicle	∠°	±30'	±30'

TEST AND ADJUSTMENT VALUES FOR REAR AXLE CAMBER

Number	Designation		AMG model 217.378/478 with code 494
BE40.20-P-1002-09ZA	Permissible difference in rear axle camber between right and left sides of vehicle	∠°	±30'