Remove/install rear seat control module - AR91.29-P-1570LFA
MODEL 222.0/1/9
with CODE 223 (Electrically adjustable rear bench seat)
MODEL 222.0/1/9
with CODE 432 (Left and right dynamic multicontour seat)
MODEL 222.0/1/9
with CODE P43 (Rear seat comfort package)
Left rear seat control unit (N32/6)
Right rear seat control unit (N32/5)
| Remove/install | |||
| Left rear seat control unit (N32/6) | |||
| 1 | Remove left cover from trunk | AR68.30-P-4600LF | |
| 2 | Remove woofer | MODEL 222.0/1/9 with CODE 223 (Electrically adjustable rear bench seat) with CODE 811 (Advanced sound system) MODEL 222.0/1/9 with CODE 432 (Left and right dynamic multicontour seat) with CODE 811 (Advanced sound system) MODEL 222.0/1/9 with CODE 811 (Advanced sound system) with CODE P43 (Rear seat comfort package) |
AR82.62-P-7839LF |
| 3 | Take off cover (1) | ||
| 4 | Remove multicontour seat pneumatic pump (M40) out of bracket (2) until electrical plug (3) can be disconnected | MODEL 222.0/1/9 with CODE 432 (Left and right dynamic multicontour seat) MODEL 222.0/1/9 with CODE P43 (Rear seat comfort package) |
|
| 5 | Disconnect electrical plug (3) at multicontour seat pneumatic pump (M40) | ||
| 6 | Unclip retaining clip (4) | ||
| 7 | Place multicontour seat pneumatic pump (M40) to one side with connected pneumatic lines | Otherwise the pneumatic lines may be damaged. |
|
| 8 | Unscrew nuts (5) from bracket (6) | ||
| 9 | Remove bracket (6) until left rear seat control unit (N32/6) can be unclipped from bracket (6) | ||
| 10 | Unclip left rear seat control unit (N32/6) from bracket (6) | ||
| 11 | Disconnect electrical connectors (7) | ||
| 12 | Remove left rear seat control unit (N32/6) from trunk | ||
| 13 | Install in the reverse order | ||
| Right rear seat control unit (N32/5) | |||
| 14 | Remove the RH panel in the trunk | AR68.30-P-4600LF | |
| 15 | Unclip right rear seat control unit (N32/5) from bracket (8) | ||
| 16 | Disconnect electrical plug (9) | ||
| 17 | Remove right rear seat control unit (N32/5) from trunk | ||
| 18 | Install in the reverse order |