000 588 03 21 00 Gas detector - WS47.00-P-0019B
MODEL ALL
Use in FG 47/Set B
Purpose:
Hydrogen gas detection unit to detect the presence of hydrogen.
Test equipment category CAT_B.
Procurement information:
This criteria catalogue serves to provide support for selection of variants of workshop equipment available on the free market. It just describes the minimum requirement for fulfilling the Mercedes-Benz standard. There is therefore no reference made to manufacturer specific equipment or devices.
Minimum requirements:
- Measuring range at least 10 ppm to 500 ppm.
- The measurement value display allows differentiation between less than 50 ppm and greater than 50 ppm.
- The device is fitted with a Teflon (PTFE) suction tip.
- The suction tip is attached to a flexible extension (gooseneck).