Remove/Install Door Sill Molding - AR68.30-P-4100GQ

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2019 Mercedes-Benz GLE63 S AMG, 2019 Mercedes-Benz GLE63 AMG, 2019 Mercedes-Benz GLE43 AMG, 2019 Mercedes-Benz GLE400, and 2018 Mercedes-Benz GLE63 S AMG. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 166, 292

	Remove/install
1.1	Slide assembly wedge below front door sill (1a) (arrow) and lift front door sill (1a) at rear	When removing front door sill (1a).
		Mounting wedge	Figure
1.2	Slide assembly wedge below rear door sill (1a) (arrow) and lift rear door sill (1a) at rear	When removing rear door sill (1b).
		Mounting wedge	Figure
2	Pivot front and rear door sill (1a, 1b) upward, unclip from retaining clips (3) and remove	Ensure that retaining clips (3) are seated correctly on body and guide edges (2) in retaining clips (3).
3	Install in the reverse order

Fig 1: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA