Connect Star Diagnosis And Read Out Fault Memory - AD00.00-P-2000-04A

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2019 Mercedes-Benz GLE63 S AMG, 2019 Mercedes-Benz GLE63 AMG, 2019 Mercedes-Benz GLE43 AMG, 2019 Mercedes-Benz GLE400, and 2018 Mercedes-Benz GLE63 S AMG. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 117, 124.034/036, 129, 140, 156, 163, 164, 166, 168, 169, 170, 171.4, 172, 176, 197, 199, 202, 203, 204, 207, 208, 209, 210, 211, 212, 215, 216, 218, 219, 220, 221, 230, 231, 240, 242, 245, 246, 251, 292, 414

MODEL 461, 463

Shown on model 210

Courtesy of MERCEDES-BENZ USA

Shown on model 204

Courtesy of MERCEDES-BENZ USA

Connect diagnostic system (2) to diagnostic connector (1).
Start diagnosis.
Select the model series in the menu.
The work procedures in the diagnosis program are menu-assisted.

Stored faults which may be caused by disconnecting cables or by simulation during testing operations must be deleted in the diagnostic trouble code memory following completion of the operations.
Disconnect diagnostic system (2).

Following completion of diagnostic operations.