LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2014 >> ML350 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 295 (Brakes - Hydraulic & Mechanical Systems - 166 Chassis - 2 Of 2) >> Maintenance >> Brake System - inspect fluid level - AP42.10-P-4210GZ

Brake System - inspect fluid level - AP42.10-P-4210GZ

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2019 Mercedes-Benz GLE63 S AMG, 2019 Mercedes-Benz GLE63 AMG, 2019 Mercedes-Benz GLE43 AMG, 2019 Mercedes-Benz GLE400, and 2018 Mercedes-Benz GLE63 S AMG. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 164, 166, 292 

Shown in model 292 

G11974642

Shown in model 164 

G11974643
  Risk of poisoning  from swallowing brake fluid. Risk of injury  from skin and eye contact with brake fluid Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. AS42.50-Z-0001-01A
NOTES Brake fluid notes   AH42.50-P-0001-01A
NOTES Notes on repairs to brake system   AH42.00-P-0003-01A
INSPECT Check     
1 Remove cover over left suspension strut tower (3) Model 166, 292  
2 Check fluid level in expansion reservoir (1)    
REFER TO CAPACITIES & SPECIFICATIONS General brake fluid   BB00.40-P-0330-01A
REFER TO CAPACITIES & SPECIFICATIONS Brake fluids (DOT 4 plus)   BB00.40-P-0331-00A
IMPORTANT The fluid level must be between the "Min." and "Max." markings on the expansion reservoir (1).
If the fluid level is too low:

Rectify problem subject to separate repair order.
If the fluid level is too high:

Extract brake fluid until the fluid level is at the "Max." mark.
3 Install cover over left suspension strut tower (3) Model 166, 292