Check visible area of poly-V belt for wear - AP13.22-P-1352CW
MODEL 117, 176 with ENGINE 133, 270, 607, 651
MODEL 156
MODEL 204 with ENGINE 156, 271, 272, 274, 276, 642, 646, 651
MODEL 205 with ENGINE 274, 276.8, 626, 651
MODEL 242 with ENGINE 270
MODEL 246 with ENGINE 270, 607, 651
| Preparatory activity | |||
| 1 | Open engine hood | MODEL 117, 156, 176, 204, 205, 242, 246 | |
| MODEL 204.3 Move engine hood to vertical position: Remove left and right clamping lever at top on left and right hinge. |
AR88.40-P-1000EW | ||
| Check | |||
| 2 | Check poly-V belt (1) for wear and damage at visible points and compare with damage profiles | AP13.22-P-1351-01A | |
| If wear or damage is present: ↓ Replace poly-V belt (1) and, if necessary, components causing damage subject to separate repair order. |
|||
| Remove | |||
| 3.1 | Remove bottom sections of soundproofing | MODEL 117, 176, 246 with ENGINE 607, 651 MODEL 204 with ENGINE 642, 646, 651 |
|
| MODEL 117, 176, 246 with ENGINE 607, 651 | AR94.30-P-5300NKB | ||
| MODEL 204 (except 204.9) with ENGINE 642, 646, 651 | AR94.30-P-5300EW | ||
| 3.2 | Remove bottom engine compartment paneling | MODEL 117, 176 with ENGINE 133 MODEL 117, 176, 242, 246 with ENGINE 270 MODEL 156 MODEL 204 (except 204.9) with ENGINE 156, 271, 272, 274, 276 MODEL 204.9 MODEL 205 with ENGINE 274, 276.8, 626, 651 |
|
| MODEL 117, 176 with ENGINE 133 MODEL 117, 176, 242, 246 with ENGINE 270 MODEL 156 |
AR61.20-P-1105NKB | ||
| MODEL 204.9 | AR61.20-P-1105CY | ||
| MODEL 204 (except 204.9) with ENGINE 156, 271, 272, 274, 276 | AR61.20-P-1105EW | ||
| MODEL 205 with ENGINE 274, 276.8, 626, 651 | AR61.20-P-1105LW | ||
| Check | |||
| 4 | Check poly-V-belt (1) for wear and damage at visible points when vehicle is raised, and compare with damage profiles | AP13.22-P-1351-01A | |
| If wear or damage is present: ↓ Replace poly-V belt (1) and, if necessary, components causing damage subject to separate repair order. |
|||
| Install | |||
| 5.1 | Install lower engine compartment paneling | MODEL 117, 176 with ENGINE 133 MODEL 117, 176, 242, 246 with ENGINE 270 MODEL 156 MODEL 204 (except 204.9) with ENGINE 156, 271, 272, 274, 276 MODEL 204.9 MODEL 205 with ENGINE 274, 276.8, 626, 651 |
|
| MODEL 117, 176 with ENGINE 133 MODEL 117, 176, 242, 246 with ENGINE 270 MODEL 156 |
AR61.20-P-1105NKB | ||
| MODEL 204.9 | AR61.20-P-1105CY | ||
| MODEL 204 (except 204.9) with ENGINE 156, 271, 272, 274, 276 | AR61.20-P-1105EW | ||
| MODEL 205 with ENGINE 274, 276.8, 626, 651 | AR61.20-P-1105LW | ||
| 5.2 | Install bottom section of soundproofing | MODEL 117, 176, 246 with ENGINE 607, 651 MODEL 204 with ENGINE 642, 646, 651 |
|
| MODEL 117, 176, 246 with ENGINE 607, 651 | AR94.30-P-5300NKB | ||
| MODEL 204 (except 204.9) with ENGINE 642, 646, 651 | AR94.30-P-5300EW | ||
| Finishing activity | |||
| 7 | Close engine hood | MODEL 117, 156, 176, 204, 205, 242, 246 | |
| MODEL 204.3 Mount left and right clamping lever at top on left and right hinge. |
AR88.40-P-1000EW |