Rear axle torsion bar - BA32.20-P-1000-04P

WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

Model 166, 292

REAR AXLE TORSION BAR

Number	Designation				MODEL 166 except CODE 468	MODEL 166 with CODE 468
BA32.20-P-1001-04P	Screw/bolt, torsion bar bracket to rear axle carrier	Stage 1		Nm	100	100
BA32.20-P-1001-04P	Screw/bolt, torsion bar bracket to rear axle carrier	Stage 2		∠°	-	45
BA32.20-P-1002-04P	Nut, torsion bar linkage to spring control arm	Stage 1		Nm	100	100
		Stage 2	Loosen	∠°	180	180
		Stage 3		Nm	35	35
		Stage 4		∠°	80	80
BA32.20-P-1003-04P	Nut, torsion bar linkage to torsion bar	Stage 1		Nm	100	100
		Stage 2	Loosen	∠°	180	180
		Stage 3		Nm	40	40
		Stage 4		∠°	80	80

REAR AXLE TORSION BAR

Number	Designation				Model 292
BA32.20-P-1001-04P	Screw/bolt, torsion bar bracket to rear axle carrier	Stage 1		Nm	100
BA32.20-P-1001-04P	Screw/bolt, torsion bar bracket to rear axle carrier	Stage 2		∠°	45
BA32.20-P-1002-04P	Nut, torsion bar linkage to spring control arm	Stage 1		Nm	100
		Stage 2	Loosen	∠°	180
		Stage 3		Nm	35
		Stage 4		∠°	80
BA32.20-P-1003-04P	Nut, torsion bar linkage to torsion bar	Stage 1		Nm	100
		Stage 2	Loosen	∠°	180
		Stage 3		Nm	40
		Stage 4		∠°	80