Rear axle torsion bar - BA32.20-P-1000-04M
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 251
REAR AXLE TORSION BAR
| Number | Designation | MODEL 251 | ||
|---|---|---|---|---|
| BA32.20-P-1001-04M | Bolt, stabilizer bar retaining clamp to rear axle carrier | Nm | 100 | |
| BA32.20-P-1002-04M | Nut, link rod to spring control arm | Stage 1 | Nm | 100 |
| Loosen stage 2 | ∠° | 180 | ||
| Stage 3 | Nm | 45 | ||
| Stage 4 | ∠° | 90 | ||
| BA32.20-P-1003-04M | Nut, link rod to stabilizer bar | Stage 1 | Nm | 100 |
| Loosen stage 2 | ∠° | 180 | ||
| Stage 3 | Nm | 40 | ||
| Stage 4 | ∠° | 80 | ||