Remove/Install Instrument Cluster - AR54.30-P-6015GQ

MODEL 166 

Fig 1: Identifying Instrument Cluster Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
1	Connect Star Diagnosis and perform initial startup of instrument cluster (A1)	When replacing the instrument cluster (A1)	AD00.00-P-2000-04A
2	Move steering wheel to rear and down
3	Switch off ignition and remove transmitter key from electronic ignition lock control unit	On vehicles with code (889) Keyless Go: Press keyless go start/stop button repeatedly until ignition is switched off. Remove transmitter key from vehicle and store it in a location beyond its transmission range (at least 2 m).
4	Remove let trim strip from dashboard		AR68.10-P-1180GQ
5	Unclip covering (2) from lower panel of instrument panel		Fig 2
6	Remove bolts (3) from instrument cluster (A1)
7	Unclip instrument cluster (A1) from instrument panel		Fig 2
8	Detach electrical connectors from instrument cluster (A1)
9	Remove instrument cluster (A1)
10	Install in the reverse order

Fig 2: Identifying Extraction Hook (140 589 02 33 00)

Courtesy of MERCEDES-BENZ USA