Replace shock absorber mount on lower control arm of front axle - AR32.25-P-0111GZ
MODEL 164, 166
| Remove/install | |||
| Notes on self-locking nuts and bolts | AH00.00-N-0001-01A | ||
| Notes on repair work on suspension components | AH00.00-P-0100-01A | ||
| 1 | Secure vehicle on vehicle lift | AR00.60-P-0100GZ | |
| 2 | Empty AIRmatic using STAR DIAGNOSIS | ||
| MODEL 164, 166 with CODE 489 (AIRMATIC) Empty and fill the AIRmatic as per the specifications; the complete wheels must not be touching the ground. The air springs can otherwise be damaged and fail later. |
AD00.00-P-2000-04A | ||
| 3 | Detach link rod from stabilizer bar | ||
MODEL 166 with CODE 468 (Active driving stability (stability)) MODEL 166 without CODE 468 (Active driving stability (stability)) |
*BA32.20-P-1002-02Q | ||
MODEL 164.1/8 |
*BA32.20-P-1004-02L | ||
| 4 | Relieve threaded connection for shock absorber on lower control arm (3) using transmission jack | Transmission jack gotis://H_00.10_01. 0 | |
| 5 | Unscrew bolt (1) | MODEL 166 |
*BA32.25-P-1002-01O |
MODEL 164.1/8 |
*BA32.25-P-1002-01G | ||
| 6 | Detach steering knuckle from upper transverse control arm | MODEL 166 | |
| *BA33.20-P-1001-01R | |||
| 7 | Lower the lower control arm (3) | ||
| 8 | Remove shock absorber (4) | Do not exceed 140 bar pressure. Otherwise the shock absorber mount (4) may be damaged Model 164: Use separate parts C and D of removal, insertion tool (5). Model 166: Use sleeve 166 589 01 14 00 and separate part C or removal, insertion tool (5). |
|
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| 9 | Install in the reverse order |
FRONT AXLE TORSION BAR
| Number | Designation | MODEL 166 without CODE 468 (Active driving stability (stability)) | MODEL 166 with CODE 468 (Active driving stability (stability)) | ||
|---|---|---|---|---|---|
| BA32.20-P-1002-02Q | Bolt, link rod to stabilizer bar | Stage 1 | Nm | 80 | 80 |
| Stage 2 | ∠° | 90 | 90 | ||
FRONT AXLE TORSION BAR
| Number | Designation | Model 164.1/8 | ||
|---|---|---|---|---|
| BA32.20-P-1004-02L | Nut, torsion bar linkage to torsion bar | Stage 1 | Nm | 100 |
| Stage 2: Loosen | ∠° | 180 | ||
| Stage 3 | Nm | 120 | ||
| Stage 4 | ∠° | 45 | ||
FRONT AXLE SHOCK ABSORBER
| Number | Designation | Model 164.1/8 | |
|---|---|---|---|
| BA32.25-P-1002-01G | Self-locking nut, shock absorber to wishbone | Nm | 265 |
FRONT AXLE SHOCK ABSORBER
| Number | Designation | MODEL 166 | ||
|---|---|---|---|---|
| BA32.25-P-1002-01O | Self-locking nut, shock absorber to wishbone | Stage 1 | Nm | 100 |
| Stage 2 | ∠° | 180 | ||
WHEEL CONTROL, HUB
| Number | Designation | MODEL 166 | ||
|---|---|---|---|---|
| BA33.20-P-1001-01R | Self-locking nut, upper ball joint out of upper transverse control arm to steering knuckle | Stage 1 | Nm | 100 |
| Stage 2 | ∠° | 45 | ||