Remove/install front shock absorber - AR32.25-P-0105GQ

MODEL 166 except CODE (489) Airmatic (air suspension with level adjustment and adaptive damping system ADS) 

Fig 1: Identifying Front Shock Absorber Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Removing
1	Remove suspension strut		AR32.25-P-1017GQ
	Disassemble
2	Disassemble suspension strut		AR32.25-P-1018GZ
3	Replace shock absorber (11)
	Checking
4	Check bellows (6) and stop damper (5)	Check for signs of wear, damage and oil fouling and replace if necessary.
	Assemble
5	Assemble suspension strut		AR32.25-P-1018GZ
	Install
6	Install suspension strut		AR32.25-P-1017GQ
7	Inspect headlamp adjustment, correct if necessary.		AP82.10-P-8260GZ