Check warning and function indicator lamps in instrument cluster - AP54.30-P-5451P
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 203
| Check | |||
| 1 | Switch off engine and switch on ignition | ||
| 2 | Operate parking brake | ||
| 3 | Check warning lamps (5, 7, 8, 9, 11) and indicator lamp (10) for proper operation | In the event of complaints: ↓ Determine and rectify cause, subject to separate repair order |
|
| 4 | Manually switch on low beams | In the event of complaints: ↓ Determine and rectify cause, subject to separate repair order |
|
| 5 | Switch on high beam | High beam indicator lamp (3) must light up and there must be no lamp failure signal in the multifunction display (12). In the event of complaints: ↓ Determine and rectify cause, subject to separate repair order |
|
| 6 | Engage reverse gear and press service brake | ||
| 7 | Switch off ignition and exterior lights | ||
| 8 | Switch on hazard warning flasher | In the event of complaints: ↓ Determine and rectify cause, subject to separate repair order |
|
| 9 | Switch off hazard warning flasher |