LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2014 >> GL550 >> Repair and Diagnosis >> External Pages >> Different car >> Section 157 (Electrical System, Equipment & Instruments - Maintenance) >> Electrical System, Equipment & Instructions - Maintenance >> Check warning and function indicator lamps in instrument cluster >> Check warning and function indicator lamps in instrument cluster - AP54.30-P-5451BK

Check warning and function indicator lamps in instrument cluster - AP54.30-P-5451BK

WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 169 as of model year 2009 with CODE 800 (Model year 2010) with CODE 801 (Model year 2011) with CODE 809 (Model year 2009) 

MODEL 245 with CODE 800 (Model year 2010) with CODE 801 (Model year 2011) with CODE 809 (Model year 2009) 

Fig 1: Identifying Warning And Function Indicator Lamps (Model 169)
G10038134Courtesy of MERCEDES-BENZ USA
INSPECT Check     
1 Switch off engine and switch on ignition IMPORTANT Engine hood, liftgate and all doors closed.  
2 Operate parking brake    
3.1 Check warning lamps (5, 7, 8, 9, 11) and indicator lamps (6, 10) for proper operation Model 169 (except 169.090)
In the event of complaints:
↓
Determine and rectify cause, subject to separate repair order		  
3.2 Check warning lamps (5, 7, 8, 9) and indicator lamps (6) for proper operation 169.090
In the event of complaints:
↓
Determine and rectify cause, subject to separate repair order		  
5 Manually switch on low beams IMPORTANT MODEL 245
Low beams indicator lamp (4) must light up.
IMPORTANT No bulb failure message in the multifunction display (12).
In the event of complaints:
↓
Determine and rectify cause, subject to separate repair order		  
6 Switch on high beam IMPORTANT High beam indicator lamp (3) must light up and there must be no lamp failure signal in the multifunction display (12).
In the event of complaints:
↓
Determine and rectify cause, subject to separate repair order		  
7 Engage reverse gear and press service brake IMPORTANT No bulb failure message in the multifunction display (12).  
8 Switch off ignition and exterior lights    
9 Switch on hazard warning flasher IMPORTANT The left and right turn signal light indicator lamps (1, 2) light and flash at the same time.
In the event of complaints:
↓
Determine and rectify cause, subject to separate repair order		  
10 Switch off hazard warning flasher    
scientia non olet · About LEMON Manuals