Check Condition Of Battery - AR54.10-P-1129GZ

MODEL 164, 166 

	Check
	Notes on AGM battery		AH54.10-P-0002-01A
1	Visual inspection for external leaks	In the event of leaks: ↓ Replace battery.	AR54.10-P-0005GZ
	Risk of explosion  from explosive gas. Risk of poisoning  and caustic burns from swallowing battery electrolyte. Risk of injury  through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries	No fires, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers.	AS54.10-Z-0001-01A
2	Check battery	Cold cranking amps as per EN
		Battery capacity 70 Ah VRLA	AR54.10-P-1129-01A
		Battery capacity 95 Ah VRLA	*BE54.10-P-1010-01A
		Battery tester 0	*BE54.10-P-1015-01A
	Risk of explosion  from explosive gas. Risk of poisoning  and caustic burns from swallowing battery electrolyte. Risk of injury  through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries	No fires, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers.	AS54.10-Z-0001-01A
3	Reduce increased voltage after charging process	On a battery that is disconnected from the on-board electrical system and with the message "Surface voltage" in the display of the Midtronics battery tester and analyzer MCR 717
			AR54.10-P-1129-03A
		After reducing increased voltage, test battery again. Stress tester.3 Battery tester 0
4	Charge battery	If test code "Charge and test" is displayed on Midtronics battery tester and analyzer MCR 717
			AR54.10-P-1130GZ
		After charging, test battery again.

TEST AND ADJUSTMENT VALUES FOR BATTERY

Number	Designation				MODEL ALL
BE54.10-P-1010-01A	Battery capacity 70 Ah VRLA	Cold cranking amps	As per EN	A	760

TEST AND ADJUSTMENT VALUES FOR BATTERY

Number	Designation				MODEL ALL
BE54.10-P-1015-01A	Battery capacity 95 Ah VRLA	Cold cranking amps	As per EN	A	850