Remove/Install Contact Plate For Cell Phone Holder (UPCI [UHI]) In The Armrest - AR82.70-P-8919GQ

MODEL 166 with CODE (518) Media interface with CODE (386) Comfort telephony 

Fig 1: Identifying Contact Plate For Cell Phone Holder Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove mat (2)
2	Remove bolt (3)
3	Pull cover (4) upward out of stowage box	Ensure that electrical lines (6) are routed correctly.
4	Disconnect electrical lines (6)
5	Remove bolts (5)
6	Remove Bluetooth® module (A34/7) from cover (4) and remove
7	Install in the reverse order