Stabilizer bars - Check for tight seating, retighten - AP32.35-P-3270G

MODEL 460, 461, 463 

Fig 1: Stabilizer Bar & Nuts

Courtesy of MERCEDES-BENZ USA

	Checking
	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.	AS00.00-Z-0010-01A
1	Raise vehicle with vehicle lift
	Lift/jack up vehicle		AR00.60-P-1000G
2	Check nuts (1) of stabilizers on front axle and rear axle for tight seating and tighten if necessary	Nut, anti-roll bar mounting clamp to trailing arm	*BA32.35-P-1001-01A
3	Check nuts (2) of stabilizers on front axle and rear axle for tight seating and tighten if necessary	Nut, stabilizer to stabilizer bracket	*BA32.35-P-1002-01A
		Nut, stabilizer bracket to frame	*BA32.35-P-1003-01A
4	Lower vehicle

ANTI-ROLL BAR

Number	Designation		Model 460, 461, 463
BA32.35-P-1001-01A	Nut, anti-roll bar mounting clamp to trailing arm	Nm	50
BA32.35-P-1002-01A	Nut, stabilizer to stabilizer bracket	Nm	90
BA32.35-P-1003-01A	Nut, stabilizer bracket to frame	Nm	90