Remove/install rear window wiper motor - AR82.30-P-6900GW
MODEL 463 (except 463.202) as of model year 2013/model refinement package 2012
| Remove/install | |||
| Risk of injury caused by moving parts that can pinch, crush or, in extreme cases even sever extremities. | Always remove ignition key when working on windshield wiper mechanism. | AS82.30-Z-0001-01A | |
| 1 | Switch off ignition | ||
| 2 | Remove rear window wiper | ||
| 3 | Remove dust cap from wiper shaft | ||
| 4 | Unscrew nut (1) | *BA82.30-P-1006-01B | |
| 5 | Unclip paneling (2) | ||
| 6 | Disconnect electrical connector (3) | ||
| 7 | Remove bolts (4) | *BA82.30-P-1007-01B | |
| 8 | Remove rear-end door wiper motor (M6/4) | ||
| 9 | Install in the reverse order |
WINDSHIELD WIPER
| Number | Designation | Model 461, 463 | |
|---|---|---|---|
| BA82.30-P-1006-01B | Nut for liftgate wiper bearing | Nm | 15 |
| BA82.30-P-1007-01B | Bolts on liftgate wiper motor | Nm | 6 |