Replace brake fluid - AP42.00-P-4280D
MODEL 463
Shown on model 463.348
| Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | AS42.50-Z-0001-01A | |
| Risk of accident when commissioning the vehicle due to a lack of braking effect when the service brake is operated for the first time after repair work. | Before starting the engine, actuate brake pedal several times until pressure is built up and maintained in the brake system. | AS42.50-Z-0002-01A | |
| Notes on repairs to brake system | AH42.00-P-0003-01A | ||
| Brake fluid notes | AH42.50-P-0001-01A | ||
| Clean | |||
| 1 | Clean area surrounding cap (2) and expansion reservoir (1) | ||
| Remove | |||
| 2 | Unscrew cap (2) | ||
| 3 | Suction off brake fluid from the expansion reservoir (1) | ||
| 4 | Add new brake fluid up to the Max. marking in the expansion reservoir (1) | ||
| 5 | Connect filling and bleeding unit on expansion reservoir (1) and switch on | ||
| Change fluid | |||
| 6 | Lift vehicle on vehicle lift | ||
| AR00.60-P-1000G | |||
| 7 | Replace brake fluid | ||
| General brake fluid | DOT 4. See GENERAL BRAKE FLUID (https://bevo.mercedes-benz.com/index.php?language_id=1) | ||
| Brake fluids (DOT 4 plus) | MB 331.0 brake fluid A 000 989 08 07 | ||
| Model 463.270/271 | AR42.10-P-0010GX | ||
| Model 463 (except 463.270/271) up to model year 2013 except code 979 (Special protection MB Guard) |
AR42.10-P-0010-02GG | ||
| Model 463 as of model year 2013 up to model year 2016 |
AR42.10-P-0010-02GW | ||
| Model 463 as of model year 2016 New brake fluid must escape without any bubbles via the bleed hose. Otherwise, damage may occur! |
AR42.10-P-0010-02GWA | ||
| *BA42.10-P-1001-02B | |||
| *BA42.10-P-1001-03G | |||
| *BA42.10-P-1001-17B | |||
| *BA42.10-P-1005-16A | |||
| 8 | Replace clutch operating system brake fluid | Vehicle with manual transmission. | |
| General brake fluid | DOT 4. See GENERAL BRAKE FLUID (https://bevo.mercedes-benz.com/index.php?language_id=1) | ||
| Brake fluids (DOT 4 plus) | MB 331.0 brake fluid A 000 989 08 07 | ||
New brake fluid must escape without any bubbles via the bleed hose. Otherwise, damage may occur! |
|||
| *BA25.20-P-1001-01H | |||
| Check | |||
| 9 | Check brake system for leaks | ||
| 10 | Check clutch operator for signs of leaks | Vehicle with manual transmission. | |
| Install | |||
| 11 | Lower vehicle with lifting platform | ||
| AR00.60-P-1000G | |||
| 12 | Connect filling and bleeding unit | ||
| Check | |||
| 13 | Check fluid level in expansion reservoir (1) | AP42.10-P-4210C | |
| Install | |||
| 14 | Screw on cap (2) |
CLUTCH OPERATING SYSTEM
| Number | Designation | Transmission 717 | |
|---|---|---|---|
| BA25.20-P-1001-01H | Bleed screw at clutch slave cylinder | Nm | 3 |
FRONT AXLE FIXED BRAKE CALIPER
| Number | Designation | Model 461, 463 | |
|---|---|---|---|
| BA42.10-P-1001-02B | Bleed screw at front axle fixed brake caliper | Nm | 14 |
FRONT AXLE FLOATING BRAKE CALIPER
| Number | Designation | Model 463.270/271 | |
|---|---|---|---|
| BA42.10-P-1001-03G | Bleed screw to front axle floating brake caliper | Nm | 17 |
REAR AXLE FLOATING CALIPER
| Number | Designation | Model 461, 463 (except 463.270/271/272/273) | Model 463.270/271/272/273 | |
|---|---|---|---|---|
| BA42.10-P-1001-17B | Bleed screw on rear axle floating caliper | Nm | 15 | 17 |
DRUM BRAKE
| Number | Designation | Model 463 | ||
|---|---|---|---|---|
| BA42.10-P-1005-16A | Vent screw at wheel cylinder | Manufacturer ATE | Nm | 3 |
| Manufacturer FAG | Nm | 6 | ||