Remove/install engine hood catch - AR88.40-P-3200GW

MODEL 463 as of model year 2013/facelift 2012 

Fig 1: Engine Hood Catch Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove front grille		AR88.00-P-2115GW
2	Remove radiator crossmember		AR62.30-P-2300GW
3	Unscrew bolts on engine hood lock (3) from body		*BA88.40-P-1004-01D
		If necessary reinstall washers installed.
4	Unhook engine hood lock	Bowden cable (2)
5	Remove engine hood lock (3)	Observe direction of installation. The arrow on the engine hood lock (3) should point in direction of arrow. First insert engine hood lock (3) and then hook in engine hood lock Bowden cable (2).
6	Install in the reverse order

ENGINE HOOD

Number	Designation		Model 461, 463
BA88.40-P-1004-01D	Bolt on engine hood catch	Nm	8