Remove/install COMAND APS hard drive - AR82.85-P-1001A
MODEL 164, 169, 171, 211, 219, 230, 245, 251 as of model year 2009 with CODE (512) COMAND APS with DVD changer with CODE (527) COMAND APS with single DVD drive (with navigation) except CODE (498) Japan version
MODEL 203.7 with CODE (527) COMAND APS with single DVD drive (with navigation) with CODE (044) New Telematics Generation NTG 2.5 except CODE (498) Japan version
MODEL 463 with CODE (EU1) COMAND APS except CODE (ZJ1) Japan version up to model year 2013/model refinement package 2012
| Remove/install | |||
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
|
|||
| 1 | Perform initial startup of hard disk (2) at COMAND operating, display and controller unit (A40/3) with STAR DIAGNOSIS | When replacing hard disk (2). | AD00.00-P-2000-04A |
| 2 | Remove the COMAND operating, display and controller unit (A40/3) | Model 164 | AR82.60-P-7502GZ |
| Model 169, 245 | AR82.85-P-1000AK | ||
| Model 171 | AR82.85-P-1000V | ||
| Model 203.7 | AR82.85-P-7472PA | ||
| Model 211 | AR82.85-P-1000T | ||
| Model 219 | AR82.60-P-7502TY | ||
| Model 230 | AR82.85-P-7472RA | ||
| Model 251 | AR82.60-P-7502RT | ||
| MODEL 463 | AR82.85-P-7472GY | ||
| 3 | Set down COMAND operating, display and controller unit (A40/3) on an electrostatic discharge (ESD) workstation | ESD protection |
|
| 4 | Remove screws/bolts (1) | ||
| 5 | Remove hard disk (2) upward (arrow) | ||
| 6 | Install in the reverse order | ||
| 7 | Update map data for navigation system | Model 164, 169, 171, 219, 230, 245, 251 up to model year 2011 Model 203.7, 211 |
|
| * Map update Model 164, 169, 171, 219, 230, 245, 251 as of model year 2011 MODEL 463 |
AP82.85-P-8250A | ||
| 8 | Perform function test |