Remove/install backup camera - AR54.65-P-0030GY

MODEL 463.222/236/237, 463.249/271 as of 2.4.07, 463.336/346 

MODEL 463.247/248/270/340/341 as of 2.4.07 with CODE (FR8) Backup camera 

Fig 1: Identifying Backup Camera Remove/Install Components (1 Of 2)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Backup Camera Remove/Install Components (2 Of 2)

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Switch off ignition
2	Remove door trim center piece (1) of rear-end door		Fig 3
3	Remove bolts (2)
4	Detach backup camera (B84/3)
5	Disconnect connector (B84/3x1)	For this purpose, pull the connection line out of the rear-end door until the connector (B84/3x1) is accessible.
6	Install in the reverse order

Fig 3: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA