Remove/install electrical connector on media interface on glove box - AR68.10-P-1400-02CW

MODEL 164, 207, 212 with CODE (518) Media interface 

Work procedure shown on model 212.

Fig 1: Glove Box, Cover And Connector

Courtesy of MERCEDES-BENZ USA

1. Open lid of glove box (1).
2. Unclip cover (2) from media interface electrical connector (X18/70) and remove.
Fig 2: Catch Hooks, Glove Compartment And Connector
Courtesy of MERCEDES-BENZ USA
3. Unlock media interface electrical connector (X18/70) from catch hooks (3) on glove compartment (1) and guide media interface electrical connector (X18/70) out of glove compartment (1) toward rear.

   Ensure that catch hooks (3) locks correctly on glove box (1).

4. Install in the reverse order.