Remove/install door sill - AR68.30-P-4100EW

MODEL 212 

Fig 1: Door Sill Remove/Install Components (1 Of 2)

Courtesy of MERCEDES-BENZ USA

Fig 2: Door Sill Remove/Install Components (2 Of 2)

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Unclip front door sill (1) or rear door sill (5) in front area (arrow) upward	The front door sill (1) is secured in the front area (arrow) with a clip (3). Check clip (3) and replace if necessary.
2	Loosen front door sill (1) from front toward rear from retaining clips (2)	When removing front door sill (1). Do not lift front door sill (1) upward in rear area to prevent damaging lug (4).
3	Pull front door sill (1) toward front out of B-pillar paneling at bottom and remove	When removing front door sill (1). Pull front door sill (1) out of B-pillar paneling at bottom until lug (4) is exposed.
4	Loosen lugs (7) from rear door sill (5) from front toward rear from retaining clips, unclip clips (6) and remove rear door sill (5).	When removing rear door sill (5). Check clips (6) and replace, if necessary.
5	Install in the reverse order