Remove/install Keyless-Go antenna - AR82.62-P-8000EWA

MODEL 212.0/1 with CODE (889) Keyless-Go in trunk 

Fig 1: Keyless Go Antenna Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
1	Remove stowage compartment beneath rear shelf (1)	Depending on vehicle configuration.	AR68.50-P-2000-01EW
2	Remove front trunk floor paneling		AR68.30-P-4600EW
3	Disconnect electrical connector (2)
4	Remove expansion clips (3)
5	Remove trunk Keyless-Go antenna (A2/35)
6	Install in the reverse order