LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2014 >> CLS550 Base >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Electrical System, Equipment & Instructions - 218 Chassis - 2 Of 4 >> Testing & Repair >> Remove/install 360° front camera - AR54.30-P-3001ECM

Remove/install 360° front camera - AR54.30-P-3001ECM

MODEL 207 as of 6/1/13 as of model year 2014 with CODE 501 (360 degree camera) 

MODEL 212 as of model year 2014 with CODE 501 (360 degree camera) 

MODEL 218 as of model year 2015 with CODE 501 (360 degree camera) 

Fig 1: Identifying Front Camera Remove/Install Components - Model 207 And 212
G09976988Courtesy of MERCEDES-BENZ USA

MODEL 207, 212, shown on MODEL 207 

MODEL 212 

Fig 2: Identifying Front Camera Remove/Install Components - Model 212
G09976989Courtesy of MERCEDES-BENZ USA

MODEL 218 

Fig 3: Identifying Front Camera Remove/Install Components - Model 218
G09976990NOTESREMOVINGINSTALLINGNOTESREFER TO SELF-DIAGNOSTIC SYSTEMSCourtesy of MERCEDES-BENZ USA
NOTES Information on preventing damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
REMOVINGINSTALLING Remove/install     
1.1 Switch off ignition and remove transmitter key from electronic ignition lock control unit MODEL 207, 212, 218 except CODE 889 (KEYLESS-GO)  
1.2 Switch off ignition and remove transmitter key or KEYLESS-GO start/stop button from electronic ignition lock control unit MODEL 207, 212, 218 with CODE 889 (KEYLESS-GO)  
2 Remove Mercedes star (1) MODEL 207 as of 6/1/13
as of model year 2014
with CODE 501 (360 degree camera)
MODEL 212
as of model year 2014
with CODE 501 (360 degree camera)
with CODE 772 (AMG styling package - front spoiler, side skirts and rear apron)
MODEL 212
as of model year 2014
with CODE 501 (360 degree camera)
with CODE 954 (Avantgarde)
 
MODEL 212
as of model year 2014
with CODE 501 (360 degree camera)
with CODE 772 (AMG styling package - front spoiler, side skirts and rear apron)
MODEL 212
as of model year 2014
with CODE 501 (360 degree camera)
with CODE 954 (Avantgarde)
AR88.40-P-4050CW
3 Remove radiator grille MODEL 212
as of model year 2014
with CODE 501 (360 degree camera)
without CODE 772 (AMG styling package - front spoiler, side skirts and rear apron)
without CODE 954 (Avantgarde)
 
AR88.40-P-4001EWM
4 Remove cold air intake crossmember (2) MODEL 207 as of 6/1/13
as of model year 2014
with CODE 233 (DISTRONIC PLUS)
with CODE 501 (360 degree camera)
MODEL 212
as of model year 2014
with CODE 233 (DISTRONIC PLUS)
with CODE 501 (360 degree camera)
with CODE 772 (AMG styling package - front spoiler, side skirts and rear apron)
with CODE 954 (Avantgarde)
 
MODEL 207 as of 6/1/13
as of model year 2014
with CODE 233 (DISTRONIC PLUS)
with CODE 501 (360 degree camera)
AR88.40-P-4001EC
5 Remove front bumper (7) MODEL 218
as of model year 2015
with CODE 501 (360 degree camera)
 
AR88.20-P-2000EL
6 Remove impact absorber (8) from front bumper (7) MODEL 218
as of model year 2015
with CODE 501 (360 degree camera)
 
NOTES General information on the impact absorber   AH88.20-P-1000-01A
7 Remove electrical line (9) for front 360° camera system camera (B84/9) from front bumper (7) MODEL 218
as of model year 2015
with CODE 501 (360 degree camera)
 
8 Unclip and disconnect electrical connector (3) from radiator grille MODEL 207 as of 6/1/13
as of model year 2014
with CODE 501 (360 degree camera)
 
9 Disconnect electrical connection (6) MODEL 212
as of model year 2014
with CODE 501 (360 degree camera)
 
10.1 Remove bolts (4) MODEL 207 as of 6/1/13
as of model year 2014
with CODE 501 (360 degree camera)
MODEL 218
as of model year 2015
with CODE 501 (360 degree camera)
 
10.2 Unclip mounting bar (5) (arrows) and push toward rear MODEL 212
as of model year 2014
with CODE 501 (360 degree camera)
with CODE 772 (AMG styling package - front spoiler, side skirts and rear apron)
with CODE 954 (Avantgarde)
 
11 Remove front 360° camera (B84/9) from radiator trim    
12 Install in the reverse order    
13 Calibrate front 360° camera (B84/9) using diagnostic system    
REFER TO SELF-DIAGNOSTIC SYSTEMS     AD00.00-P-2000-04A