Remove/install drive cable for panoramic sunroof roller sun blind - AR77.21-P-0230NKA

MODEL 117, 156, 176 with CODE 413 (Automatic panoramic sliding sunroof) 

MODEL 205.0/1/2 with CODE 413 (Automatic panoramic sliding sunroof) 

MODEL 222 with CODE 413 (Automatic panoramic sliding sunroof) 

MODEL 253 with CODE 413 (Automatic panoramic sliding sunroof) 

Shown on MODEL 176 

Fig 1: Drive Cable Remove/Install Components - Shown On Model 176

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove panoramic sliding roof roller sun blind	Model 156 with code 413 (Automatic panoramic sliding sunroof) Model 205.0/1/2 with code 413 (Automatic panoramic sliding sunroof) Model 253 with code 413 (Automatic panoramic sliding sunroof)	AR77.21-P-0200NKX
		Model 117, 176 with code 413 (Automatic panoramic sliding sunroof)	AR77.21-P-0215NKA
2	Remove panoramic sliding roof roller sun blind motor		AR77.21-P-0490NKA
3	Push roller sun blind mount (2) on left and right roller sun blind drive cable (1) toward rear out of roller sun blind guide rail (3) with assembly wedge	Mounting wedge	Fig 2
4	Manually pull roller sun blind drive cable (1) toward rear out of roller sun blind guide rail (3)
5	Install in the reverse order

Fig 2: Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA