Retrofit Audio 20 CD including preinstallation for Garmin (R) MAP PILOT - AN82.60-P-0019NKH

MODEL 117.3 with CODE 505 (Radio 20 NTG5, not navigation-enabled) except CODE 460 (Canada version) except CODE 494 (US version) except CODE 498 (Japanese version) 

MODEL 117.3 with CODE 520 (Audio 20 USB) except CODE 460 (Canada version) except CODE 494 (US version) except CODE 498 (Japanese version) 

Fig 1: Locating Radio

Courtesy of MERCEDES-BENZ USA

	Remove
1	Remove radio (A2) (Radio 20 NTG5 non-navigation-capable or Audio 20 USB)
			AR82.60-P-7502NKB
		The radio (A2) (Radio 20 NTG5 non-navigation-capable or Audio 20 USB) is no longer required.
	Install
2	Install new radio (A2) (Audio 20 CD including preinstallation for Garmin® MAP PILOT)
			AR82.60-P-7502NKB
	Update Vehicle Documentation (VeDoc)
3	Delete special equipment in online vehicle data card	MODEL 117.3 with CODE 505 (Radio 20 NTG5 non-navigation-capable) CODE 505 (Radio 20 NTG5 non-navigation-capable)
4	Delete special equipment in online vehicle data card	MODEL 117.3 with CODE 520 (Audio 20 USB) CODE 520 (Audio 20 USB)
5	Enter special equipment in online vehicle data card	CODE 522 (Audio 20 CD including preinstallation for Garmin® MAP PILOT) Code 818 (Single CD drive)
6	Attach note "Audio 20 CD including preinstallation for Garmin® MAP PILOT retrofitted as per AN82.60-P-0019NKH " under field organization texts to design group 82
7	Connect diagnostic system and select vehicle via the vehicle identification number (VIN)
			AD00.00-P-2000-04A
8	Carry out variant coding using software calibration number (SCN)	Instrument cluster  Head unit
9	Carry out variant coding using software calibration number (SCN)	MODEL 117.3 with CODE 218 (Reversing camera) Backup camera control unit
10	Carry out variant coding using software calibration number (SCN)	Model 117.3 with code 350 (eCall Europe emergency call system) model 117.3 with code B54 (Live Traffic Information) Communications module
11	Disconnect diagnostic system
			AD00.00-P-2000-04A