Legend of electrical function schematic for washer nozzle/washer nozzle hose heating - PE82.35-P-2052-60CAA
MODEL 216.3 as of model year 09/YoM 08
| Code | Designation | Coordinates |
|---|---|---|
| A8/1 | Transmitter key | 13B |
| B14 | Outside temperature display temperature sensor | 10J |
| G2 | Generator | 3J |
| N3/10 | ME-SFI [ME] control unit | 3F |
| N3/10 | ME-SFI [ME] control unit | 4D |
| N10/1 | Front SAM control unit with fuse and relay module | 12E |
| N73 | EIS [EZS] control unit | 12A |
| N93 | Central gateway control unit | 8E |
| R2/1 | Washer nozzle heater | 15E |
| R2/11 | Washer nozzle hose heater | 12K |
| U708 | Valid for washer nozzle hose heater | 12J |
| CAN B | Interior CAN | 10E |
| CAN B | Interior CAN | 12D |
| CAN-E | Chassis CAN | 6E |
| LIN C1 | Drive train LIN | 1H |
| 1 | Circuit 61, status | 2E |
| 1 | Circuit 61, status | 7F |
| 1 | Circuit 61, status | 11E |
| 2 | Circuit 15, status | 13D |
| 3 | Temperature sensor for outside temperature indicator, signal | 11F |
| 4 | Washer nozzle heater, actuation | 14E |
| 5 | Washer nozzle hose heater, actuation | 13J |