Component description for voice control system (VCS [SBS]) control unit - GF82.70-P-4300LE
MODEL 216, 221 up to 31.5.09 with CODE (813) Voice control system (VCS [SBS]) as of model year 2009/YoM 08
Shown on model 221
Location
The voice control system control unit (VCS [SBS]) is located in the left rear of the trunk.
Task
The voice control system has the following tasks:
- Reading in of signals
- Processing signals
- Transmitting signals
Reading in of signals
Signals are read in via the following connections:
- Direct line
- Media Oriented System Transport (MOST)
Direct line
The following signals are read in with direct lines:
- Electronic wake-up for MOST
- Voice input signals via 2 microphone inputs from the handsfree system microphone group (A67b1)
MOST
The following signal is read in via LIN:
- Signal for activating or deactivating the voice control system (VCS) from the COMAND controller unit (A40/3)
Processing signals
The spoken commands are processed internally in the voice control system (VCS [SBS]) control unit.
Transmitting signals
Signals are sent through the following connection:
- MOST
MOST
The following signals are sent via MOST:
- Voice control signals of the telephone, Short Message Service (SMS) and address book communication applications to the UPCI [UHI] (Universal Portable Cell Phone Interface) control unit (N123/1) (with code (386) Preinstallation for telephone "cell phone" UPCI [UHI] system or code (389) Mobile phone preinstallation with universal interface USA/Canada)
- Voice control signals of the audio applications (radio, CD/DVD) to the audio tuner control unit (N93/1)
- Voice control signals of the navigation system to the COMAND controller unit, (without code (526) COMAND with single DVD drive (without navigation))
Variants
The following languages are available for the voice control system:
- English
- English
- French
- Italian
- Spanish
- Dutch
| Voice control system (VCS [SBS]) control unit wiring diagram | Model 216 | PE82.70-P-2102-99CAA | |
| Model 221 | PE82.70-P-2102-99SAA |