Legend of wiring diagram of electronic transmission control (ETC) control unit - PE27.19-P-2101-60CAA
TRANSMISSION 722.6 in MODEL 216.3 with ENGINE 275.953/982 control unit N15/3
| Code | Designation | Coordinates |
|---|---|---|
| A0 | Color code key | 15L |
| N10/1 | Front SAM control unit with fuse and relay module | 2L |
| N15/3 | ETC [EGS] control unit | 4A |
| N15/3 | ETC [EGS] control unit | 12A |
| U12 | Valid for left-hand drive vehicles | 3E |
| U13 | Valid for right-hand drive vehicles | 3E |
| W 15/1 | Ground (right footwell) | 3G |
| W 34/1 | Ground (electronics - left footwell) | 3G |
| X30/21 | Drive train CAN voltage distributor connector | 6L |
| Y3/6 | Electrical control unit | 10L |
| Y3/6b1 | Transmission oil temperature sensor | 11H |
| Y3/6n2 | RPM sensor 2 | 12K |
| Y3/6n3 | RPM sensor 3 | 11K |
| Y3/6s1 | Starter lockout contact | 11H |
| Y3/6y1 | Modulating pressure control solenoid valve | 9H |
| Y3/6y2 | Shift pressure control solenoid valve | 9H |
| Y3/6y3 | 1-2 and 4-5 shift solenoid valve | 9J |
| Y3/6y4 | 3-4 shift solenoid valve | 9J |
| Y3/6y5 | 2-3 shift solenoid valve | 9K |
| Y3/6y6 | Torque converter lockup PWM solenoid valve | 9K |