Wiring diagram of navigation system - PE82.85-P-2005-97CAA
MODEL 216 China navigation, Control unit A2/30
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Color code key | 32L |
| A2/30 | Navigation processor | 4A |
| A2/30 | Navigation processor | 12A |
| A2/30 | Navigation processor | 20A |
| A40/3 | COMAND control unit | 4L |
| A40/3 | COMAND control unit | 4L |
| F1/7 | Left instrument panel fuse box | 8L |
| H4/27 | Center cockpit speaker (centerfill) | 24L |
| N10/1 | Front SAM control unit with fuse and relay module | 20L |
| N10/2 | Rear SAM control unit with fuse and relay module | 12L |
| N47-5 | ESP control unit | 16L |
| S76/15 | Electric parking brake switch | 23L |
| W34 | Ground (left footwell) | 9G |
| W34 | Ground (left footwell) | 23G |
| X18 | Cockpit wiring harness and FFS [RBA] connector | 12G |
| X29/19 | F-BAS signal connector (Comand to navigation/China) | 4F |
| X39/35 | GPS antenna connector | 1L |
| Z6/30 | Circuit 31 connector sleeve | 9E |
| Z81/5 | Circuit 58d COC connector sleeve | 19E |