Electrical function diagram for windshield wipe-stop function - PE82.30-P-2054-97CAA
MODEL 216.3 as of model year 09/YoM 08
| Code: | Designation: | Position: |
|---|---|---|
| 1 | Circuit 15, status | 7D |
| 2 | Combination switch, status | 5E |
| 2 | Combination switch, status | 3D |
| 3 | ATA [EDW] engine hood switch, status | 7G |
| 3 | ATA [EDW] engine hood switch, status | 8J |
| 4 | Vehicle speed, signal | 5E |
| 4 | Vehicle speed, signal | 3G |
| 5 | Master wiper motor, actuation | 9E |
| 6 | Slave wiper motor, actuation | 10D |
| A1 | Instrument cluster | 2J |
| A8/1 | Transmitter key | 7B |
| CAN B | Interior CAN | 6C |
| CAN B | Interior CAN | 6H |
| CAN B | Interior CAN | 4E |
| CAN E | Chassis CAN | 2C |
| CAN F | Central CAN | 2G |
| M6/6 | Master wiper motor | 9F |
| M6/7 | Slave wiper motor | 9C |
| N10/1 | Front SAM control unit with fuse and relay module | 7E |
| N10/2 | Rear SAM control unit with fuse and relay module | 6H |
| N73 | EIS [EZS] control unit | 6A |
| N80 | Steering column module | 2A |
| N93 | Central gateway control unit | 2E |
| S4 | Combination switch | 1A |
| S62 | ATA [EDW] hood switch | 9K |