LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2014 >> CL600 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Timing -- Cl600 (216.376) >> General Information >> Slackening and tightening instructions for the camshaft bearing caps - AH05.20-P-0300-01A

Slackening and tightening instructions for the camshaft bearing caps - AH05.20-P-0300-01A

Engine 275 

IMPORTANT

Fig 1: Identifying Left Cylinder Head Camshaft Bearing Caps Bolts Tightening Sequence
G07541619Courtesy of MERCEDES-BENZ USA

Tightening instructions for left cylinder head 

  1. Tighten screws stepwise according to the specified sequence.

    IMPORTANT At the same time the bearing caps must not tilt.

Slackening instructions for left cylinder head 

IMPORTANT The slackening of the screws is performed in the reverse order.

Tightening instructions for right cylinder head 

  1. Tighten screws stepwise according to the specified sequence.

    IMPORTANT At the same time the bearing caps must not tilt.

Slackening instructions for right cylinder head 

Fig 2: Identifying Right Cylinder Head Camshaft Bearing Caps Bolts Tightening Sequence
G07541620Courtesy of MERCEDES-BENZ USA

IMPORTANT The slackening of the screws is performed in the reverse order.

scientia non olet · About LEMON Manuals