Remove/install fan shroud - AR20.40-P-6800SZ

ENGINE 275 (except 275.982) in MODEL 216, 221 

Fig 1: Identifying Fan Shroud Components

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Fan Shroud And Brackets

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove front engine cover	Engine 275.95	AR01.10-P-2405LA
		Engine 275.98	AR01.10-P-2405IM
2	Remove engine intake air duct
3	Unclip bracket (1)
4	Disconnect electrical connector (2s) on electrical suction fan
5	Unclip coolant hose (6) on upper right on radiator from bracket
6	Detach edge stripping (3) in area of the radiator crossmember (5)
7	Detach clamps (2k) on the left and right from fan shroud (2) brackets (2h)
8	Pull our ventilation hose (4) between fan shroud (2) and radiator crossmember (5)
9	Remove front and center section of engine compartment paneling	Vehicles without code (Z07) Top protection	AR61.20-P-1105SX
		Vehicles with code(Z07) Top protection	AR61.20-P-1105SXS
10	Unhook fan shroud (2) out of radiator	Lift fan shroud (2) until brackets (2n) have moved out of the radiator mounts. Installation:  Check for correct seating of fan shroud (2) brackets (2n) in the radiator mounts.
11	Remove fan shroud (2) downwards
12	Install in the reverse order