Prepare center roof paneling - AR65.10-P-1000-03SC
- Grind mating surfaces on center roof paneling (1) down to bare metal in cross-hatched areas on one side from bottom using round wire brush (areas A, B, C and D).
- Grind all other mating surfaces in cross-hatched areas on one side using round wire brush.
- Remove grinding and drill shavings using wet/dry vacuum cleaner.
- Coat insides of spot weld flange with zinc dust paint (all cross-hatched areas except areas A, B, C and D).
Courtesy of MERCEDES-BENZ USA