Test and adjustment values: Passenger cars: Doors - BE72.00-Z-9999AZ
MODEL all
| Adjustment values for front door | MODEL 215, 220, 230 | BE72.10-P-1000-01C |
| Adjustment values for front door | MODEL 202, 203, 209, 210, 240 | BE72.10-P-1000-01A |
| Adjustment values for front door | MODEL 218, 219 | BE72.10-P-1000-01E |
| Adjustment values for front door | MODEL 221 with CODE (Z07) Top protection | BE72.10-P-1000-01H |
| Adjustment values for front door | MODEL 216 MODEL 221 except CODE (Z07) Top protection | BE72.10-P-1000-01G |
| Front door adjustment values | Model 171.4 | BE72.10-P-1000-01F |
| Rear door | MODEL 218.3, 219 | BE72.12-P-1000-01C |
| Rear door | MODEL 221 with CODE (Z07) Top protection | BE72.12-P-1000-01E |
| Rear door | MODEL 221 except CODE (Z07) Top protection | BE72.12-P-1000-01D |
| Rear door | MODEL 220 with CODE (Z07) highest protection | BE72.12-P-1000-01BA |
| Rear door | MODEL 203, 220, 240... | BE72.12-P-1000-01B |
| Rear-end door | MODEL 168, 203 | BE72.20-P-1000-02A |
Adjustment values for front door - BE72.10-P-1000-01G
Model 216, model 221 without top protection
MODIFICATION NOTES
| 12.9.05 | Clearance in door lock | Model 221 |
TEST VALUES FOR FRONT DOOR
| Number | Designation | Model 221 | Model 216 | |
|---|---|---|---|---|
| BE72.10-P-1001-01G | Clearance in door lock | mm | 1.3 (+0.3) | 1.3 (+0.3) |
| BE72.10-P-1002-01G | Insertion depth for front edge of front door in roof frame seal | mm | - | 9 |