Remove/install tail lamp - AR82.10-P-4905SX

MODEL 216.3, 221.0 /1

Shown on model 221 up to 31.5.09 on left tail lamp

Fig 1: Identifying Tail Lamp Remove/Install Components

G07543616

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Detach left or right paneling on side of luggage compartment and swivel inward	Vehicles without code (Z07) Top protection	AR68.30-P-4600SX
1		Vehicles with code (Z07) Top protection	AR68.30-P-4600SXS
2	Unscrew nuts (2), unplug electrical connector (1) and remove left tail lamp (E3) or right tail lamp (E4)	In model 216 the left tail lamp (E3) and the right tail lamp (E4) are screwed on with four nuts (2).
3	Detach detachable parts from left tail lamp (E3) or from right tail lamp (E4)	Only when replacing on model 221.0 /1 up to 31.5.09 except CODE (800) Model year 2010 Installation : Attach new trim panels to left tail lamp (E3) or right tail lamp (E4). Reuse screws of LED board.	AR88.85-P-9814SX
4	Install in the reverse order