Activate/deactivate service mode in TELE AID emergency call system - AR82.95-P-0005-03AM

Activate service mode in emergency call system (PIN of TELE AID SIM card is known).

1. 1.1 Switch on ignition. Switch on telephone Enter *#4610# on telephone handset. Confirm message "No telematics service" with "OK." Switch off ignition and remove ignition key. Switch off telephone

   Activate service mode in emergency call system (PIN of TELE AID SIM card not known)

2. 1.2 Switch on ignition. Switch on telephone Hold C-button pressed for 5 seconds. Enter *#4610# on telephone handset. Confirm message "No telematics service" with "OK." Switch off ignition and remove ignition key. Switch off telephone

   Activate service mode in emergency call system (with STAR DIAGNOSIS).

3. 1.3 via STAR DIAGNOSIS in TELE AID control module under
   1. --> Menu for control module adaptations
   2. --> Read control module coding and if necessary change
   3. --> Additional battery
   4. --> Service mode

   Deactivate service mode in emergency call system.

4. 2.1 Switch on ignition.

   Confirm handset message "exit service mode" by confirming with "OK."

   Confirm message "No telematics service" with "OK." Switch off ignition

   Deactivate service mode in emergency call system (with STAR DIAGNOSIS).

5. 2.2 via STAR DIAGNOSIS in TELE AID control module under
   1. --> Menu for control module adaptations
   2. --> Read control module coding and if necessary change
   3. --> Additional battery
   4. --> Service mode