Electrical function diagram for fully integrated transmission control output signals - PE27.19-U-2056-60FAA
TRANSMISSION 722.9 in MODEL 204.0
| Item | Designation | Coordinates |
|---|---|---|
| A1 | Instrument cluster | 15E |
| A8/1 | Transmitter key | 12B |
| N3/10 | ME-SFI [ME] control module | 10E |
| N10/1 | Front SAM control module with fuse and relay module | 19B |
| N10/2 | Rear SAM control module with fuse and relay module | 22G |
| N15/5 | Electronic selector lever module control module | 10K |
| N30/4 | Electronic Stability Program control unit | 15A |
| N73 | Electronic ignition switch control unit | 10A |
| X11/4 | Diagnostic connector | 19G |
| Y3/8n4 | Fully integrated transmission control control unit | 5H |
| Y3/8y1 | Working pressure control solenoid valve | 3H |
| Y3/8y2 | Clutch control solenoid valve K1 | 3H |
| Y3/8y3 | Clutch control solenoid valve K2 | 3H |
| Y3/8y4 | Clutch control solenoid valve K3 | 3H |
| Y3/8y5 | Multidisk brake control solenoid valve B1 | 3J |
| Y3/8y6 | Multidisk brake control solenoid valve B2 | 3J |
| Y3/8y7 | Multidisk brake control solenoid valve B3 | 3J |
| Y3/8y8 | Torque converter lockup clutch control solenoid valve | 3K |
| CAN B | Interior CAN | 22F |
| CAN C | Drive train CAN | 10H |
| CAN D | Diagnostic CAN | 19F |
| CAN E | Chassis CAN | 13D |
| 1 | Control solenoid valve, actuation | 4H |
| 2 | Transmission control, request | 7H 11E 16C |
| 3 | Fully integrated transmission control control unit FBS code, message | 7H 11C |
| 4 | Transmission control diagnosis, communication | 8H 17C 19E |
| 5 | Backup lamp, actuation | 8H 17C 22G |
| 6 | Selector lever position, message | 9H 16E |
| 7 | Transmission modes, message | 9H 16D |
| 8 | Transmission control, signal | 11D 16C |