Legend of electrical function diagram for starter control - PE15.30-U-2051-60FAB
ENGINE 272 in MODEL 204.0 with TRANSMISSION 716.6
| Item | Designation | Coordinates |
|---|---|---|
| A8/1 | Transmitter key | 5B |
| B11/4 | Coolant temperature sensor | 1G |
| B70 | Crankshaft Hall sensor | 2J |
| M1 | Starter | 7J |
| N3/10 | ME-SFI [ME] control module | 4E |
| N10/1 | Front SAM control module with fuse and relay module | 4H |
| N10/1kM | Starter circuit 50 relay | 4H |
| N73 | Electronic ignition switch control unit | 4A |
| S40/5 | Start enable clutch pedal switch | 7F |
| U24 | Valid for manual transmission | 7E |
| CAN E | Chassis CAN | 4D |
| 1 | Circuit 50, status | 5E |
| 2 | Clutch pedal switch, status | 6F |
| 3 | Starter circuit 50 relay, actuation | 5H |
| 4 | Starter, actuation | 6J |