Legend of electrical function diagram for antitheft alarm system alarm triggering by panic switch - PE80.50-U-2054-60FAA
MODEL 204 with CODE (763) Radio remote control with panic switch
| Item | Designation | Coordinates |
|---|---|---|
| A2/18 | FM, AM and CL [ZV] antenna amplifier | 12A |
| A8/1 | Transmitter key | 5A 9L |
| A26/1 | Driver-side front door infrared remote control receiver | 2C |
| E1e5 | Left front turn signal lamp | 20C |
| E2e5 | Right front turn signal lamp | 16C |
| E3e1 | Left rear turn signal lamp | 10C |
| E4e1 | Right rear turn signal lamp | 14C |
| E6/5 | Left exterior mirror turn signal lamp | 5G |
| E6/6 | Right exterior mirror turn signal lamp | 13J |
| N10/1 | Front SAM control module with fuse and relay module | 16J |
| N10/2 | Rear SAM control module with fuse and relay module | 7E |
| N69/1 | Left front door control unit | 2E |
| N69/2 | Right front door control unit | 10J |
| N73 | Electronic ignition switch control unit | 7J |
| CAN B | Interior CAN | 5F 5K 7H 10H 11F |
| 1 | Access authorization code, signal | 2D 3A 6K 8D 8H 12A |
| 2 | Panic alarm, signal | 2D 4A 6K 8D 8H 11A |
| 3 | Panic alarm, status | 8G |
| 4 | Flasher frequency, signal | 4E 11H 16H |
| 5 | Turn signal lamp, actuation | 4H 11E 12J 14E 17E 20E |
| 6 | Interior lamp, request | 16H |